MT HORIZONTAL MIXER WAGONS
USER’S MANUAL
Page
28
Once the mixer is hooked up, raise the trailer jack to its upper limit to avoid hitting
possible obstacles on the ground during operation.
Parking the mixer:
1.
Park the mixer in a flat area, far away from furrows, channels, banks, and ditches, etc. Lower
the jack until it makes contact with the ground.
2.
Raise the mixer, using the jack until the tractor drawbar can be freed manually by removing the
hitch pin easely.
3.
If the mixer is equipped with a hydraulic trailer jack, remove the lever and return it (P) to its
holder.
2.4. MIXER CONTROLS
Monoblock Distributor
In order to control the different machine services, the mixer is equipped with an hydraulic monoblock
distributor (M), which is located at the front of the mixer. The distributor is activated from a distance using a
control cable (flexible) that is activated by multiple levers each of which corresponds to every service.
Figure 2.6 Hydraulic Block
The levers are mounted on a portable frame.
The mixer comes equipped with a metal plate (Ch) coupled to
the side of the tub.
Figure 2.7 Portable Frame with Control Levers and Support
Another folded metal plate, just like the one previously described, is supplied with the mixer. This second
plate can be mounted in the tractor cab. The plate should be situated inside the tractor cab in such a way
that the control levers:
M
Ch
M
