MT HORIZONTAL MIXER WAGON
USER’S MANUAL
Page 56
Trailer with Cutter
1. Cutter bearing (side opposite of motor)
2. Lever arm support
3. Upper support cutter lift cylinder (both sides)
4. Lower support cutter lift cylinder (both sides)
5. Rear loading door guides (both sides)
Note: For the greasing of the rear support bearing of the auger it is necessary that the milling cutter is
raised. To do this, raise the telescopic rear door and the cutter, completely close the regulator of the
latter's descent speed and stop the tractor.
This operation will be carried out with the mixer and tractor fully stopped, in addition,
the personnel who carry it out must keep the tractor keys in their possession until
the end of the operation.
E
E
1
5
4
3
2
