72
TASCAM DP-004
7–Recorder Functions
2 Turn the
DATA
wheel to change the value above
the cursor. When adjusting, the value will carry
over automatically when it reaches the highest or
lowest value in a field. For example, when turning
the
DATA
wheel to increase the value in the seconds
field, the number will change from
59
to
0
and
the minutes value will increase by one. The time
display blinks when using the
DATA
wheel. The
blinking stops about two seconds after moving to
the new position.
3 Press the
F1 (
DIGIT
)
key to move to a different
time division and turn the
DATA
wheel to change
the value.
4 After setting the desired time value, press the
playback (
Á
) key to start playback from that
position.
RTZ and LRP
Use simple key operations to return to the top of a
song or to the position where recording last started.
Return To Zero (song beginning at 00:00:00:00)
Press the
Ô
key while pressing and holding the
stop (
ª
) key.
Last Recording Position (the position recording
last started)
Press the
key while pressing and holding the
stop (
ª
) key.
This function is useful when you want to record the
same passage again.
TIP
RTZ and LRP below the
Ô
and
keys are abbre-
viations for Return To Zero and Last Recording Position,
respectively.
