TANDBERG TT-1222, Reference Manual

Page: 119 / 132

Front Panel LCD Menus
Reference Guide: TT1222 4:2:0 Professional Receiver Page C-31
ST.RE.TT1222.2
ASI Input
Table C.45: Input Status Menu, ASI Input
Menu title: STAT:INPUT Description Section
Lock: Indicate whether the input is locked.
Options are: Locked and Not locked ----
QPSK Input
Table C.46: Input Status Menu, QPSK Input
Menu title: STATUS: INPUT Description Section
Lock: Indicates whether the demodulator is locked.
Options are: Locked and Not locked ----
BER(PostV): Provides the post Viterbi BER measurement, in logarithmic
annotation. ----
Inner Code: Displays the inner code. ----
Spec Inv: Displays the Spec Inv. ----
Lock freq: Provides the frequency at which the demodulator has locked in
Gigahertz (GHz). ----
C.6.5 Signal Status Menu
The signal status menu provides information on the incoming transport
stream.
Table C.47: Signal Status Menu
Menu title: STAT:SIGNAL Description Section
Pkt OK: Counts the number of seconds since the last sync break. ----
Bit-rate: Reports the current total bit-rate of the incoming transport stream
in Mbit/s. ----
TV Service > Enters the TV Service status submenu C.6.6
Audio 2 Service > Enters the Audio 2 Service status submenu C.6.8
C.6.6 TV Service
Table C.48: TV Service Status Menu
Menu title: STAT:TV SERVICE Description Section
Video > Enters the video status submenu. C.6.7
Audio 1 >
Enters the Audio1 status submenu.
C.6.8
VBI > Enters the VBI status submenu. C.6.9
Data > Enters the Data status submenu. C.6.10
C.6.7 Video Status Menu
The video signal status submenu contains information about the currently
decoded MPEG-2 video.