TANDBERG TT-1222, Reference Manual

Page: 124 / 132

Front Panel LCD Menus
Page C-36 Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
C.7.2 HW Config Menu
Lists the available features and hardware of the Unit. A “+” in front of the
component, signifies that the component is present. A “-“ in front of the
component, signifies that the component is not available.
Example text is provided in Table C.59
Table C.59: HW Config Menu
Menu title: PROP: HW CONFIG Description Section
+ RS232.Remote RS-232 remote control is available ----
+ QPSK.Input QPSK input is available ----
- ASI.Input ASI input is not available (option not fitted) ----
- ASI.Output ASI output is not available (option not fitted) ----
C.7.3 Network Menu
The network properties can be found under this menu item.
Table C.60: Network Menu
Menu title: PROP: NETWORK Description Section
IP Addr > This is where the IP address of the receiver can be set and read C.7.4
SubNet Mask > This is where the SubNet Mask of the receiver can be set and
read C.7.5
Gateway Addr > This is where the Gateway address of the receiver can be set
and read C.7.6
MAC Addr > This is where the MAC address of the receiver can be viewed. C.7.7
C.7.4 IP Address
The IP address of the unit can be set/changed by the user at any time.
The unit must be reset for the new address to be used.
C.7.5 SubNet Mask
The SubNet Mask of the unit can be set/changed by the user at any time.
C.7.6 Gateway Address
The Gateway address of the unit can be set/changed by the user at any
time.
C.7.7 MAC Address
This address is information only and cannot be changed.