Alarms/GPOs
Reference Guide: TT1222 4:2:0 Professional Receiver
Page 6-7
ST.RE.TT1222.2
Table 6.6: Navigating the GPO Configuration Menus
Step Action
Result
1.
Go to the GPO setup menu, located
under Setup
⇒
Outputs
⇒
GPOs.
The display will read “SET:GPOs” on the top line.
2.
Using the up and down arrows, select a
GPO to be set up. Right-click to enter
the setup.
Scrolling up and down will now reveal all available
events.
3.
Select an event and right-click to enter
its setup.
4. Select
On or Off for the event.
‘On’ means the GPO will trigger (logic level : high)
when the event occurs.
4.
Right-click to save the setup. Then left
click to return to the complete event list.
5.
Continue as above to set up more
events for the same GPO or to setup
the other GPOs.
Summary of Contents for TT-1222
