TANDBERG TT-1222, Reference Manual

Page: 112 / 132

Front Panel LCD Menus
Page C-24 Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
C.5.22 Data Port Menu
The data port menu contains the controls for the physical output of the LS
data.
The settings configured here, need to match the settings on the device set
up to receive the LS data.
Table C.30: The Data Port Setup Menu
Menu title: SET:DATA PORT Description Section
Baud Rate: Sets the baud-rate for the communication with the external device.
75, 110, 150, 200, 300, 600, 1050, 1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200
Default = 115200. ----
Data Bits: Sets the number of data bits used for each character.
7 - The number of data bits is set to 7
8 - The number of data bits is set to 8
Default = 8. ----
Stop Bits: This setting determines the time between each character being
transmitted (bits per second).
0.5 - 0.5 bits/s
1.0 - 1 bit/s
1.5 - 1.5 bits/s
2.0 - 2.0 bits/s
Default = 1.0. ----
Parity: The parity bit setting defines the type of error checking used.
None – No parity
Odd – Odd parity
Even – Even parity
Default = None. ----
Flow Control: Sets the flow control.
None – No flow control.
NOTE…
Only one option is available
----