TANDBERG TT-1222, Reference Manual

Page: 19 / 132

Installing the Equipment
Reference Guide: TT1222 4:2:0 Professional Receiver Page 2-3
ST.RE.TT1222.2
2.1 Read this First!
2.1.1 Handling
The TT1222 must be handled and installed carefully and thoughtfully to
prevent safety hazards and damage.
2.1.2 Installing the Equipment
Follow the instructions for installation and only use installation accessories
recommended by the manufacturers.
Ensure that personnel designated to install the unit have the appropriate
skill and knowledge. If in any doubt, please contact Customer Services
(see Preliminary pages for contact details).
When rack mounted, this unit must have shelf supports as well as being
fixed at the front panel. Do not use this product as a support for any other
equipment.
2.1.3 Lifting
Although this is a light product, in some circumstances it might be
awkward to lift, especially when packed. In which case, do not attempt to
lift or move it without proper assistance or equipment. If in doubt, get
help.
2.1.4 Site Requirements
Power Supplies
See Annex B, Technical Specification for a full specification.
Environment
See Annex B, Technical Specification for a full specification.
Do not install this product in areas of high humidity or where there is
danger of water ingress.
Lightning Protection
WARNING…
IF THE UNIT HAS BEEN SUBJECT TO A LIGHTNING STRIKE OR POWER SURGE WHICH HAS
STOPPED IT WORKING, DISCONNECT THE POWER IMMEDIATELY. DO NOT REAPPLY POWER
UNTIL IT HAS BEEN CHECKED FOR SAFETY. IF IN DOUBT, CONTACT TANDBERG TELEVISION
CUSTOMER SERVICES.
Where appropriate, ensure this product has an adequate level of lightning
protection. Alternatively, during a lightning storm or when it is left
unattended and unused for long periods of time, unplug it from the supply
outlet and disconnect the output equipment. This prevents damage to the
product due to lightning and power line surges.