Operating the Equipment Locally — System Menu: Service Info Menu (Syntax = DVB)
Page 4-14
Reference Guide: evolution 5000 E5780 and E5782 Encoder
ST.RE.E10135.4
Selected Item
Options
Description
PAT/PMT/CAT only
Program Association Table/ Program Map Table/ Conditional Access Table.
PAT/PMT only
Program Association Table/ Program Map Table.
Off
On
SI Level:
Enables the service information
level to be specified.
On (No EIT)
Data n min/max:
Select a PIDmin and PIDmax range
for a specified input [n].
Only available when M2/EOM2/REMUX is purchased.
All PIDs lying within this range are passed through. No attempt to extract SI
information nor interpret SI/PSI information is made on this input.
The Encoder is not able to build accurate PSI tables when in data remux mode
as it does not extract any info from the incoming stream. Therefore, in this
case, it is necessary for PSI/PSIP to be externally generated.
There must be no PID clashes (between other inputs or the locally generated
streams) as PID clashes are not resolved nor detected by the Encoder.
Network Id:
Specify the Network Identity.
The information is included in the NIT.
This option is not displayed if the unit is set to generate PSIP externally or it is
under MEM/nCC control.
Service Id:
Specify the Service Identity.
This option ties the SDT to the PMT and is the same as the Program Number
in ATSC. The information is included in the PAT, PMT, SDT, EIT and NIT.
This option is not displayed if the unit is set to generate PSIP externally or it is
under MEM/nCC control.
Transport Stream Id:
Set the Transport Stream ID value
for the transport stream output from
the Encoder.
This option is not displayed if the unit is set to generate PSIP externally or it is
under MEM/nCC control.
Analog TV
Digital TV
Digital Radio
Teletext,
Service Type:
Identifies the type of service
carried.
Data Broadcast
The information is included in the Service Description Table (SDT).
PMT PID:
Shows the Program Map Table
Packet Identifier.
Stream ID Descriptor:
Turns on or off the insertion of a
stream identifier descriptor within
the PMT.
DVB & ATSC
Both the ATSC and DVB descriptors are used with the audio streams.
DVB only
Only the DVB descriptors are used with the audio streams.
ATSC only
Only the ATSC descriptors are used with the audio streams.
Dolby Digital Descriptor:
Specify the descriptors for use with
audio streams.
It is necessary because the ATSC descriptor existed prior to the DVB descriptor and some Decoders
(e.g. early Alteias) used the Dolby Digital descriptor for identifying Dolby Digital streams.
Only available when the syntax is set to DVB.
Logical Chan Desc:
Turn the Logical Channel
Descriptor On or Off.
The information is included in the NIT (for Australia mainly).
Logical Channel:
Enter a Logical Channel number.
Only shown if the Logical Chan Desc option is set to On.
