TANDBERG E5780 Reference Manual Download Page 174

Page: 174 / 298

Operating the Equipment Locally — Setup Menu: Configs Menu

Page 4-96

Reference Guide: evolution 5000 E5780 and E5782 Encoder

ST.RE.E10135.4

NOTE…
The 16 backup configurations are loaded immediately the Load Configs from Backup softkey is

pressed although the current Encoder configuration remains unchanged.

4.14.7

Store Configs in Backup Option

This enables the 16 user configurations to be stored in the backup, and may be password
protected.

NOTE…
The 16 backup configurations are stored immediately the Store Configs in Backup softkey is

pressed.

4.14.8

Factory HD Defaults Option

This option enables the 16 user configurations to be overwritten by the factory default settings.

Summary of Contents for E5780











































































































































































































































































































Search results

Summary of Contents for E5780

Reviews:

Brands by name

Popular brands

TANDBERG E5780, Reference Manual

Search results

Summary of Contents for E5780

Reviews:

Brands by name

Popular brands