Tandberg Data SLR7-140 PROGRAMMER, Manual

Page: 310 / 364

Tandberg Data Request Sense
23-2 Tandberg SLR Product Line SCSI Functional Specifications
23.3. Parameter List
BYTE BIT 7 6 5 4 3 2 1 0
00 VADD Response Code
01 RESERVED
02 FMK EOM ILI RES Sense Key
03 Information Bytes
04
05
06
07 Additional Sense Length
08 RESERVED
09
10
11
12 Additional Sense Code
13 Additional Sense Code Qualifier
14 FRU Code
15 SKSV Sense Key Specific
16 Sense Key Specific
17
18 RESERVED
19 Error Recovery Action Code (ERAC)
20 FOR INTERNAL USE
21 RESERVED
Table 23-2: REQUEST SENSE Parameter List
VADD
A Valid Address (VADD) bit of zero indicates that the
Information Bytes are undefined. A VADD bit of one
indicates that the Information Bytes contain valid
information.
Response Code
The Response Code field is set to 70h for normal errors
and to 71h for deferred errors.
FMK
The Filemark (FMK) bit indicates that the current
command has read a filemark.
EOM
The End Of Media (EOM) bit indicates that the last
command encountered end-of-partition or beginning-of-
partition.
ILI
The Incorrect Length Indicator (ILI) bit indicates that
the requested logical block length did not match the
logical block length found on the tape.
Sense Key
This field holds information about the cause of error.
See section 23.4. for a description of the Sense Key
codes.