Tandberg Data M-Series Installation Guide
Document T6423046-02 A01
February 2004
Preparing and Inserting Tape Cartridges
37
c
Using a slender object such as a pen, press and hold the magazine
release button (see
).
d
Pull the left magazine the rest of the way out of the library.
Figure 33 Magazine
Release Button
2
Remove the right magazine:
a
Press the button next the right magazine access door and open the
door.
b
Grasping the handle at the front of the right magazine, pull it forward
and out of the library.
3
Insert the cleaning cartridge into the fixed slot behind the left magazine,
orienting it with the label facing outward and the write-protect switch:
• Down, if it is a DLT or SDLT cartridge
• Up, if it is an LTO cartridge
4
Insert cartridges into each of the magazine slots:
a
Orient the cartridges as described in
.
b
Push each cartridge into a slot until the cartridge retaining latch clicks
to hold the cartridge in place.
Caution:
The magazines are designed so that you cannot insert
cartridges incorrectly. Do not try to force the cartridges
into the slots.
Magazine
release
button
