Tandberg Data M-Series Installation Guide
Document T6423046-02 A01
February 2004
Installing a Rack Mount Library
13
6
a
Position a shelf clamp (PN 213467) on the front left rack rail.
The bottom of the shelf clamp should be flush with the bottom of the
shelf.
b
Secure the shelf clamp to the rack rail using an M4 countersink screw
(PN YS42038).
c
Repeat these steps to install shelf clamps at the front and back of each
shelf.
d
Tighten the nuts securing the shelves to the shelf extenders.
Figure 10 Securing the
Shelf Clamp to the Rail
The shelf installation is now complete. Proceed to
on page 28 to install the library.
Note:
The universal rack mount kit contains screws and nuts for
many different types of rack. You will have many of these
screws and nuts left over after installing the rack mount
shelves and library.
Shelf clamp
