Tandberg Data M-Series Installation Guide
Document T6423046-02 A01
February 2004
20
Installing a Rack Mount Library
7
Install the rear shelf clamps (see
):
a
Position a rear shelf clamp (PN 215201/01) on the rear left rack rail,
aligning the square hole with the middle insert in the shelf flange.
b
Verify that two of the round holes line up with holes in the rack
mount shelf. If two of the holes do not line up, rotate the clamp 180
degrees.
c
Secure the rear shelf clamp to the shelf using two M4 countersink
screws (PN YS42064).
d
Repeat these steps to install a rear shelf clamp on the rear right rack
rail.
Figure 17 Installing the
Rear Shelf Clamps
Note:
The left and right rear shelf clamps will be oriented differently
from one another.
