Tandberg Data M-Series Installation Guide
Document T6423046-02 A01
February 2004
24
Installing a Rack Mount Library
4
a
With the shelf slightly retracted, position the shelf in the rack at the
desired mounting height.
b
Expand the shelf so that the inserts on each end of the shelf protrude
into the holes in the rack rails and hold the shelf in place.
c
Repeat these steps to install the remaining shelf.
Figure 21 Installing the
Shelves
5
Install the front shelf clamps (see
):
a
Position a front shelf clamp (PN 215812) on the front left rack rail.
The square holes in the front shelf clamp should be aligned with the
upper two inserts in the front shelf flange.
b
Secure the front shelf clamp to the rack rail using two M4 countersink
screws (PN YS42064).
c
Repeat these steps to install a front shelf clamp on the front right rack
rail.
Inserts protrude
through the
holes in the rails
