TallyGenicom LA800+ User Manual Download Page 149

Page: 149 / 157

User guide

Options and accessories

142

Options and accessories

Options

The following options can be ordered for your printer.

Tractor 2, front

The push tractor is suitable for fanfold paper. You can use paper for-
mats with a width in the range from 76 to 406 mm; you can set any
intermediate format.

Part no.: 061 052

Printer pedestal

A cabinet to be used as a printer stand and for storing fanfold paper
stacks.

Part no.: 061 910

Paper output tray

An optional accessory for the printer stand, useful for optimum out-
put of prin-ted continuous forms.

Part no.: 060 833

Cable cover

Part no.: 061 909

Interface modules

The following interface modules are available.

Name

Part no.

Serial interface RS422/V.11

048 956

Serial line current interface TTY 20 mA

048 957

Ethernet interface module ENI/3 (multi-protocol
TCP/IP, SPX/IPX)

048 959

Summary of Contents for LA800+






























































































































































Search results

Summary of Contents for LA800+

Reviews:

Related manuals for LA800+

Brands by name

Popular brands

TallyGenicom LA800+, User Manual

Search results

Summary of Contents for LA800+

Reviews:

Related manuals for LA800+

Brands by name

Popular brands