User guide
The Menu
85
Setting the bottom margin
(Botmrg)
The bottom margin option gives you the possibility to set the bottom
margin with the number of the line (numbered from the top paper
edge) where the printing actually stops for a given page.
Press the Botmrg key (2).
Setting options: Line 1 to Formlength
Default setting:
Formlength
The setting of this Option depends on the setting of both the
vertical pitch and the form length options. For details refer to
Setting line spacing (LPI)
(page 54) and
Form length (Formlen)
(page 68). The Values range from the value for top margin (see
Setting the top margin (Topmrg)
on page 84) to the value for form
length.
Do not set Topmrg eqal or higher than Botmrg.
Confirm the setting by pressing the Set (1) key. Change to the next
parameter with the Next key (4).
Setting the left margin (Leftmrg)
The left margin option is defined by the number of the columns
(numbered from the left paper edge) where the printing actually
starts.
Press the Leftmrg key (2).
Setting options: 0 to 30/10"
Default setting:
0/10"
Confirm the setting by pressing the Set (1) key. Change to the next
parameter group with the Next key (4).
Topmrg Botmrg
Online
Setup
Back
Next
2
1
3
4
Botmrg= 70
*
Online
Setup
Set
<
>
Exit
2
1
3
4
STOP
Leftmrg
Online
Setup
Back
Next
2
1
3
4
Leftmrg=
0
*
/10
"
Online
Setup
Set
<
>
Exit
2
1
3
4
