TallyGenicom LA800+ User Manual Download Page 125

Page: 125 / 157

User guide

Care and maintenance

118

Cleaning the platen

Remove the ribbon. Clean the printer bar cau-
tiously with an alcohol-based cleaning agent.

Remove dustcarefully from the platen.

Avoid touching parts and compon-
ents in the printer interior.

Ribbon

Check whether the ribbon is worn or damaged. The ribbon must be
replaced if it is frayed, see

Inserting the ribbon cassette

(page 10)

and

Error messages via the display

(page 112).

Cleaning the upper friction

Clean the rollers of the upper friction as neces-
sary with a mild cleaning agent and a soft, lint-
free cloth.

Avoid touching the pin rollers.

Carriage shafts

Carriage shafts must not be oiled or greased; otherwise
damage will occur on the printer.

STOP

Summary of Contents for LA800+






























































































































































Search results

Summary of Contents for LA800+

Reviews:

Related manuals for LA800+

Brands by name

Popular brands

TallyGenicom LA800+, User Manual

Search results

Summary of Contents for LA800+

Reviews:

Related manuals for LA800+

Brands by name

Popular brands