User guide
The Menu
77
Automatic gap adjustment
(AGA)
This function allows you to switch the Automatic Gap Adjustment
(AGA) off or on.
Press the AGA key (3).
Setting options: Off/On
Default setting:
On
AGA=On: printer checks paper thickness and changes gap adjust-
ment if necessary (default). Measurments take place
– after power-on
– in single sheet mode: for each sheet
– in tractor mode: whenever changing the paper path, when
loading paper
AGA = Off: selects manual gap adjustment; the value can be set for
each paper source and each of the 4 macros available.
Confirm the setting by pressing the Set (1) key. The printer automat-
ically leaves test mode and assumes online mode.
Paper handling (Paphand)
The Paphand group of menus improves the possibilities for the trou-
blefree printing of paper with properties likely to cause problems
(perforations etc.) or paper of poor finish.
Put the printer into Menu mode by pressing the Setup key. Press the
Menu key. The display shows Print/Macro. Press Next or Back key
until the parameter group Paphand/CX-bid appears in the display.
Press the Paphand key (2).
Select the Head up menu (2).
PMS
AGA
Online
Setup
Back
Next
2
1
3
4
AGA=On *
Online
Setup
Set < > Exit
2
1
3
4
Paphand CX-bid
Online
Setup
Back Next
2
1
3
4
Head up Pagewid
Online
Setup
Back
Next
2
1
3
4
