When having torn off the fanfold paper and after switching over
from fanfold paper to single sheets, the fanfold paper moves to the
park position.
4. Check that the fanfold paper is in the park position when you insert a single
sheet. This means the fanfold paper should not be loaded (pulled in). To
check this, raise the guide of the single sheet feeder.
If necessary, drive the remaining paper manually to the park posi-
tion with the key
.
➲
Paper jam (fanfold paper)
1. Open the top cover. If a paper jam should occur, then remove the jammed
paper by tearing it off at the tear off edge (the tear off edge is located at the
outfeed for the fanfold paper).
2. Press the key
to transport the paper backwards (substitutes manual
knob).
3. You may support the paper return feed by cautiously pulling the paper in the
correct direction.
Before you replace the fanfold paper, refer to the instructions in the section
-
Loading paper
.
You should pay special attention to the following points:
Insert the paper straight.
After inserting the paper, close the tractors.
Reference manual
Troubleshooting
117