➤
Messages in the LC
display
If the printer detects an internal fault or user error or if it expects you to
do something, a message will appear in the LC display. Below you will
find a list of messages with brief descriptions of each message. The
messages are described in greater detail in the chapter
Troubleshooting
.
Meldung
Bedeutung
Eject error
The printer cannot eject the paper / advance it to park position.
Hardware Alarm
Internal hardware error, contact your dealer or service technician.
Head hot
The printer reports that the print head is hot and that print speed will be
reduced.
Initializing
This message appears during the printer’s initializing phase.
Load error
The printer cannot draw in the loaded paper.
Loading default
Indicates that the printer is being initialised and is carrying out the internal self-
test immediately after turning on the printer. Factory defined parameters will
be reloaded in all available menues.
Out of paper
The printer has detected paper end during operation / printer was switched on
with no paper loaded.
Parity error
A parity error during data transmission is indicated.
Press any key
The user is requested to press any key.
Tear Paper off
The user is requested to tear off paper which has been advanced to the quick
tear edge.
Selftest
After power-on, the printer executes a short hardware self-test.
Reference manual
The control panel
15
