Tally Dascom 2810, User Manual

Page: 152 / 168

User Guide Options and accessories
Barcode
Even the standard version of your printer has the possibility of using up to 23
different barcode types.
Barcode mode can be accessed within every emulation. The user can
decide whether barcode is activated permanently or activated depending
on the situation by means of an escape sequence.
List of available barcodes
Type Barcode Type Barcode
A* 2/5 Matrix (default) N UPC A (with HRI)
B* 2/5 Industrial O UPC A (without HRI)
C* 2/5 Interleaved P UPC E (with HRI)
D* Code 11 Q UPC E (without HRI)
E* BCD Matrix R* Delta Distance (IBM)
F* Code 39 S Code 128
G* Codabar T EAN 128
H* EAN 8 (with HRI) 1) US-Postnet
I* EAN 8 (without HRI) 1) KIX Barcode
K* EAN 13 (with HRI) 1) Royal Mail Customer Barcode
L* EAN 13 (without HRI) 1) USPS Intelligent Mail Barcode
M* MSI /modified PLESSEY
* These barcodes may be printed out horizontal and vertical, the unmarked only horizontal.
1) See description on the following pages.
The barcode types K, L, N, O may be expanded by using Add-On Barcodes: Add-
On 2 and Add-On 5.
The information to be printed is transmittted in a “bracket” (DC4).
A control sequence (Header) defines the parameters of the used barcode once
(e.g. type, ratio, etc.). If no header is defined, the information in the “bracket” will
be printed in Code 2/5 Matrix.
Please note that within the Barcode environment the barcode commands
have priority in case of conflicts with the emulation.
Additional information is provided in the
Barcode Programmer’s
Applicaton Manual on this CD-ROM.
153