background image

 

VOIP-500

 

Series Phone 

Configuration and Operation Manual 

 
Page 

48

 of 

90 

 

Copyright 2012 Talk-A-Phone Co.

 

• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com. 

 

All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved. 

 

4.10.3. 

Logging 

Log messages generated by the phone can be captured for review. Enabling the “DEBUG” option may 

degrade the phone’s performance. It is 

recommended to not use this option unless required. 

Login → Maintenance →

 Logging     

 

 

 

 

 

Figure 25 Logging 

To configure logging over the network: 

1. 

Select the 

Network

 option. This option enables 

Logging Server

 fields. 

2. 

Enter the 

Logging Server IP Address

 and the 

Logging Server Port

3. 

Select the log levels for different modules from the drop-down menu. 

4. 

Click 

Apply

 to save the settings. 

Note

 To disable logging, select 

Nowhere (Disable)

 

Note

 To download and save the log file on the computer, click the Download link. 

Note

 A maximum of 500 KB of logging data can be collected. On exceeding this limit, the older 250 KB of 

logging data are purged from the log file. 

  

Summary of Contents for VOIP-500 Series



























































































Reviews: