VOIP-500
Series Phone
Configuration and Operation Manual
Page
19
of
90
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.5. VoIP
4.5.1. Number Lists
A phone can have seven lists of phone numbers. Each list can contain up to six numbers for round robin
dialing. If the first number dialed is busy or does not answer after a specified number of rings, the phone dials
the next number in the phone number list. The phone continues trying the numbers in the list in order until it
reaches the last number programmed in the list. If the last phone number is also busy or does not answer
after the specified number of rings, the phone should go back to dialing the first number, then the second
number, etc. until the call is completed, or until the time limit defined by Call Conversation Timer expires.
The numbers from these lists are dialed on call initiation when the associated buttons are pressed or when
the associated Auxiliary Inputs are activated (Refer to 4.6.5 Auxiliary Inputs).
Login → VoIP →
Number Lists
Figure 7 Number Lists
To set numbers in the number lists:
1.
Use the drop-down menu to select the number list to be configured (List1 is the default list assigned to
Button 1.)
2.
Provide up to six numbers. Numbers can be in the format of plain numbers/aliases or as number@ip
address. Valid range is up to 30 characters.
3.
Click
Apply
to save settings.
1
2
3
4
