VOIP-500
Series Phone
Configuration and Operation Manual
Page
23
of
90
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
4.5.4. Call Parameters
The Call Parameters page is used to configure the mandatory and the optional call related parameters such
as call progress tones, answer/disconnect key, welcome tone, and timers.
Login → VoIP →
Call Parameters
Figure 10 Call Parameters
To set the call parameters:
1.
Select
Enable
/
Disable
to allow/mute call progress tones to be heard by the user until the call is answered
by the remote side.
2.
Click the drop-down menu to set a key to answer a call and/or disconnect a call from the remote side. You
can assign a key within the range of 0-9, *, #, or Disable.
3.
Select
Enable
or
Disable
to enable or disable the “Welcome Tone”. When enabled, a tone is
played to the
remote side when a call is placed to the VOIP-500 phone that auto-
answers the call. The “Welcome Tone”
assists with distinguishing ETP-400 Series Phones from the VOIP-500 Series Phones.
1
2
4
4
6
4
3
5
4
