VOIP-500
Series Phone
Configuration and Operation Manual
Page
27
of
90
Copyright 2012 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talk-A-Phone Co. All rights reserved.
2.
When a Button is configured for
Autodial
mode, configure the following:
i.
Use the drop-down menu to assign the Number List. Phone Numbers from the Number List are
dialed in round robin fashion when the corresponding button is pressed.
ii. Select the
Call Priority
. This parameter assigns a priority to the call that is generated when the
corresponding button is pressed. A call with a “Call Priority” of 1 terminates all the existing calls
having the call priority in the range of 2
–
10.
iii. Select the
Network Priority
4
to assign a network priority to the placed call. The value is utilized by
the network to prioritize voice traffic. The default value is 46.
3.
Click
Apply
to save settings.
Note
Button #1 has the highest call priority and this cannot be changed. Pressing Button #1 cancels all
operations and places a call.
4
Network priority is the same as Differentiated Services Code Point (DSCP). Do not change this unless absolutely required as it might
degrade the voice quality of the phone.
