Talex SPRINTER 1500, Original User Manual, Page: 83 / 129

83
environmental factors causing corrosion and ageing of any materials. Additionally, during long
downtimes (e.g. winter) it is recommended to:

Lubricate any moving joints with fresh grease;

Apply commercially available anti-corrosion silicone based agents on the surface of bolts and
pins to inhibit the corrosion onset.

Apply commercially available tyre maintenance products on the tyres 2-3 times a year to
protect them from UV rays.

In the case of long time of downtime, the machine should be slightly moved in order to
change the tyre position, so that it not be deformed and the air pressure in tyres should be
checked. This procedure should be carried out once a month on average.

Store the controller and the wire in a domestic environment during periods of downtime.
Store the controller and the wire in a domestic environment.
Exposing the controller to weather factors may cause permanent damage.
9.4 Troubleshooting
FAULT CAUSE REPAIR
Controller does not
start.
No power supply.
Check the connection
between the controller and
the relay box.
Check the fuses on the tractor
and on the controller.
Check the wire for damage.
No movement of
hydraulic actuators.
Supply and return lines connected
incorrectly.
Swap the supply and return
lines of the hydraulic system.
Incorrect operation of
the hydraulic system.
Damage to the hose or actuator. Replacement or regeneration.
Dirty oil filter.
Replacement of the filter
cartridge.
Incorrect viscosity of the hydraulic
oil.
Check the oil quality, make
sure that the oils in both
machines are of the same
grade.
If necessary, change oil in the
tractor and/or in the bale