Talex SPRINTER 1500, Original User Manual, Page: 78 / 129

78
9. Maintenance
9.1 Maintenance after work
After the work is finished, the machine should be thoroughly cleaned and washed with a running
water stream. In the case of high-pressure devices, exercise caution and do not direct the stream
directly towards any types of labels on the machine and elements such as bearings, shaft joints, etc.
It is recommended that cleaning and washing be carried out on the wash equipped with a water
treatment system or a settlement tank for waste neutralisation.
Having performed the cleaning and drying of the machine, check the general technical condition of
all sub-assemblies and, if needed, remove any found damage or replace a worn element with a new
one.
In case of varnish coating damage, remove any mechanical residues of an old painting, degrease, and
then apply a primer coat. When the primer coat is dry, apply the paint coat. Replace damaged and
worn out parts with new ones.
Check all the screwed joints, tighten the loose screws and nuts according
to Table . The manufacturer of the machine, Talex, provides all spare parts.
Caution!
Nuts with polyamide insert – self-locking (jam) are disposable and cannot be reused after
disassembly. Replace them with new ones.
Caution!
For servicing and maintenance operations, general-purpose hand tools such as combination spanners,
socket wrench, Allen keys and other tools should be used in accordance with their operating instructions,
taking into account their operability and safety requirements
Durability 6.8 8.8 10.9 12.9
Metric thread Tightening torque [Nm]
M5 4.5 5.9 8.7 10
M6 7.6 10 15 18
M8 18 25 36 43
M10 37 49 72 84
M12 64 85 125 145
M14 100 135 200 235