Talex SPRINTER 1500, Original User Manual, Page: 27 / 129

Page 27 of 129
SELF-LOADING BALE WRAPPER
SPRINTER 1500
The cut and hold is used to cut off the film after the wrapping cycle is complete, and to hold the other end
of the film until the next bale is turned twice.
Figure 11 Cut and hold components
(1) cut and hold frame, (2) hydro accumulator, (3) blade, (4) passive buffer, (5) driven buffer, (6) supply line, (7) actuator, (8)
throttling valve
The cut and hold is mounted along the driving table roller on the frame (1) screwed to the profile of the
rotary frame. The film is cut and held in place by the automatically controlled hydraulic system. The piston
in the actuator (7) is pushed out by means of the pressure in the hose (6), while the hydro accumulator (2)
is used to push it in. The blade (3) is used for cutting when the film is pressed against it by means of
rubber buffers (4) and (5). The hydraulic fluid in the hydraulic accumulator is throttled using a throttling
valve (8). When the machine is started, the first cycle starts with the accumulation of pressure in the
accumulator, which is automatically repeated every 10 cycles.
Remove the blade guard before starting work, see Figure 12.