Talex SPRINTER 1500, Original User Manual, Page: 35 / 129

Page 35 of 129
SELF-LOADING BALE WRAPPER
SPRINTER 1500
6.1. Installing the bale wrapper
The bale wrapper can be coupled with the tractor of power not higher than 35 HP equipped with a single-
axle trailer hitch. Coupling the bale wrapper with the tractor should be performed on hard and even
ground.
Before coupling the bale wrapper, read the Instructions Manual carefully. Additionally,
always pay particular attention to maintaining safety during aggregating the machine with
the tractor!
6.2. Connecting bale wrapper to a tractor
Procedure to be performed to connect the bale wrapper:

drive your tractor up to the bale wrapper,

on the reverse gear, slowly reverse towards the bale wrapper's hitch (1) ensuring nobody is
standing between the machine and the tractor or in the immediate surrounding of the machine,

when reversing, move the tractor's hitch (4) as close as possible to the bale wrapper's hitch,

stop the tractor and prevent its accidental movement,

connect the machine's hitch to the tractor's hitch with a pin (2), secure with a locking pin,

lift the support foot (Figure 22),

connect hydraulic conduits of the machine (3) to tractor hydraulic sockets,

connect the electrical wiring to the tractor's power supply socket.
Figure 18 Coupling bale wrapper with a tractor
(1) drawbar eye, (2) pin, (3) hydraulic hoses, (4) tractor hitch
Coupling the bale wrapper with the tractor should be performed on hard and even ground.