Talex SPRINTER 1500, Original User Manual, Page: 64 / 129

Page 64 of 129
SELF-LOADING BALE WRAPPER
SPRINTER 1500
8.2 Operating modes
The bale wrapper can be controlled using one of three modes:

AUTO mode
Select the “AUTO” mode to perform all the movements of individual sections in one full cycle
after pressing the start.

SEMI-AUTO mode
Select the “SEMI-AUTO” mode to operate the machine in two ways. In the first one, you click on
the selected control signal for the operation to take place automatically and once finished, wait
until you input another signal to be executed. The individual sections are executed separately
after they are started. In the other one, you hold down the button for the operation to be carried
out until the button is released. The operation is terminated at any time after removing the finger
from the button.

MANUAL Mode
In the “MANUAL” mode, all operations are confirmed by the operator who holds down a control
button for the section required. Removing your finger from the button terminates the operation
of the section.
8.3 Control panel operation
The control unit is switched on automatically as soon as the power is connected. The screen will display
the start sequence, the name of the company with the address, and when finished, a message prompting
to confirm that the bale grab lock has been removed, see Section 6.4 Figure 21.
Caution!
It is forbidden to operate the grab actuator with the grab lock on, as it can cause damage to the
machine.
Once the grab lock is removed and confirmed, the main screen with basic information is displayed.
Depending on the selected operating mode, the main screen can vary slightly:

Automatic mode screen