TAKE-A-LABEL TAL-3000C, Operation Manual

Page: 24 / 47

Page 3.6
Troubleshooting Guide
PROBLEM PROBABLE CAUSE
No Power 1. Machine Not Plugged In
2. No Main Power
3. Fuse Blown ( See page 3.4)
Label Will Not Feed 1. Label Sensor Set Up Incorrectly ( See
page 2.12 , 2.13)
2. No Power (See Above)
Labels Feed Out Non-Stop 1. Label Sensor Set Up Incorrectly (See
page 2.12 , 2.13)
2. Label Sensor Blocked
3. Fiber Optic Cables Damaged Check
For Kinks In Cables
Erratic Label Feed 1. Label Sensitivity Incorrect ( See page
2.12)
2. Pinch Roller Not Locked
3. Worn Or Dirty Traction Roller
4. Dirty Fiber Optic Ends
5. Pinch Cam Lock Needs Adjusting
Label Won't Stay On Pad 1. No Vacuum.
2. Air Assist Either Too Much Or Not
Enough. If Not Enough Label Will
Fall Down, If Too Much Label Will
Be Blown Off Pad
(See page 2.6).
3. Air Supply Not Connected
Label Predispense Too Little/Too Much 1. Use Label A/- Function On
Side of Labeler To Adjust.
Liner Keeps Ripping Or Braking 1. Check The Peel Edge Covering