Page 1.1
General
Thank you for purchasing the TAL-3000C continuous duty tamp labeler. The TAL-
3000C system is known for its high quality and operating simplicity. With proper
maintenance it will provide years of dependable and trouble free service.
Our equipment is manufactured to the strictest standard and is thoroughly tested before
being released into the field. However, sometimes a problem may arise that is not
covered by the scope of this manual. If a situation as such occurs, further technical
support is just a phone call away.
Power
Requirements:
110 VAC 15 Amps 60 Hz, Grounded
Pneumatic
Requirements:
60 PSIG Clean Dry Air
System Weight:
55 LBS.
Unit Dimensions
:
15 1/2”w x 20”h
Maximum Roll Size:
12" converted on a standard 3" diameter core.
Accuracy:
+/- 1/32
Summary of Contents for TAL-3000C
