Close the tap firmly.
After use or shampooing is complete, turn the tap
firmly in a clockwise direction and turn the water
off completely. Failure to turn the water off
completely may cause water leakage.
Avoid direct sunlight or excessive heat.
Failure to follow this instruction may cause
discoloration or degradation of the product.
Do not wipe with chemicals or apply heat.
Failure to follow this instruction may cause
deformation or discoloration. If chemicals adhere
on to the covers, wipe them dry as soon as
possible.
Do not use strongly acidic or strongly
alkaline cleaning solvents.
Do not use cleaning solvents containing mainly
caustic soda (NaOH) or caustic potash (KOH) to
clean the drain pipe, etc. Never pour thinners,
alcohol, nail polish remover, gasoline or kerosene
into the drain. Failure to follow this instruction
may cause breakage of the drain hose.
Clean the hair catcher regularly.
Clean the hair catcher as regularly as possible.
Continuing use of the hair catcher without
cleaning it may cause the drain to become blocked
with hair, leading to water overflowing or
unhygienic conditions. Try to clean the hair
catcher after each shampoo.
Do not cover the drain outlet when
this product is not going to be used.
Do not cover the drain outlet with the drain cap,
towel, or shampoo cloth after finishing the work.
Water may overflow the basin when hot water/
water is improperly discharged or a small amount
of hot water/water is discharged due to an
increase in water pressure during the night,
resulting in water leakage.
Always wipe the floor clean if it is wet.
Wipe the floor as soon as possible if it is wet after
shampooing. Failure to follow this instruction may
damage the floor or cause degradation to parts in
contact with the floor.
Return the dual function shower head to
the shower head holder so that the water
spray nozzle faces the basin.
Failure to follow this instruction may cause water
to spill out of the basin or splash on the client with
water.
Do not touch the hot water supply pipe
or mixing pipe.
The hot water supply pipe or mixing pipe may
become very hot. Do not touch the pipes directly.
Set the water temperature for this
product to 80°C or less.
Failure to follow this instruction may cause
malfunction or breakage in parts such as the stop
valve, check valve, flexible pipe and thermostat
water valve.
Precautions for Use
Caution
5
