23
Kerosene
Alcohl
Thinner
Wax
Abrasive
Chemicals
■
Neck Cushion, Head Pillows
■
Hair Catcher
Care and Maintenance
Never use volatile chemicals such as thinners, alcohol, gasoline or kerosene, cleaning products such as abrasive
wax, a sponge with a scourer, detergents that include organic solvents, acidic, alkaline or chlorine-based deter-
gents, or scouring pads. Failure to follow this instruction may cause scratches or discoloration.
Clean the hair catcher as regularly as possible. Continuing to use the hair
catcher without cleaning can cause the drain to become blocked with
hair, leading to water overflowing and unhygienic conditions. Try to clean
the hair catcher after each shampoo.
・
If solvents drip onto the neck cushion or head pillows, rinse it with water as soon as possible. Failure to follow this
instruction may cause deformation or discoloration.
・
Clean the neck cushion and head pillows every day. Leaving dirt unclean may cause them to get moldy.
Pull out the hair catcher located under the drain cap and remove any hair that
has been caught. The hair catcher is a consumable supply. Replace the hair
catcher if it is extremely dirty or the surface has deteriorated.
(available at additional cost)
At the end of work each day, wash the neck cushion and head pillows with water, wipe them dry with a towel, and
allow them to dry in the shade. If they are extremely dirty, wash with detergent diluted with water, and rinse carefully
with water.
The neck cushion and head pillows are consumable supplies. Replace them if they are extremely dirty or the surface
has deteriorated. (available at additional cost)
Caution
Caution
Caution
Drain Cap
Hair Catcher
Drain outlet
・
Repeated usage of even general domestic-use sponges may damage the surface.
Therefore do not use sponges.
・
Abrasives, as well as sponges containing abrasives, metal scourers, nylon scourers, etc.
May damage the surface. Ensure that these are not used.
・
Do not use chlorine chemicals and acid chemicals because they may peel the surface
plating.
・
If scratching or damage appears on resin or plated parts such as the tap and thermostatic control knob, then
immediately suspend use, and contact the closest dealer or Takara Belmont. Failure to suspend use may result in
peeling plating or damage, leading hand injuries.
■
Shower head holder, Tap, Thermostatic control knob
Wipe away contamination using a soft cloth or towel that has been moistened with a dilute, neutral detergent.
Caution
