35
■
Items that must be inspected after closing for the day
Inspectionitem
Inspection method
If the inspection results show defects
■
Items that must be inspected once each week
□
Is there any water
leakage inside of the
basin unit?
□
Is there any water
leakage from the drain
hose?
□
Is there any lime scale
or dirt blocking the
shower head plate?
□
Remove the maintenance cover of
the basin unit and check that there
is no water leakage from the
internal pipes and water faucet.
(Refer to pages 26 to 28.)
□
Check if there is no water leakage
from the mounting part of basin
unit and SWING Arm. (Refer to
pages 26 to 28.)
□
Remove the shower head plate
from the shower head and check
that there is no lime scale or dirt
on it. (Refer to pages 24.)
□
Remove the object that is blocking the drain. If the
drain is blocked, water that is turned on
accidentally or a slight trickle of water due to an
increase in water pressure at night may cause
water to spill from the basin, leading to water
leakage.
□
Turn the tap firmly and turn the water off properly.
If the water does not turn off completely, there
may be a malfunction in the stop valves of the tap.
Close the stop valves of the water / hot water
supply pipes (Refer to pages 26 to 28.),
immediately stop using the product and contact
the nearest dealer or Takara Belmont directly.
□
If water is leaking from the pipes, the pipes and
gasket may be worn, degraded or damaged.
Close the stop valves in the water / hot water
supply pipes (Refer to pages 26 to 28),
immediately stop using the product, and contact
the nearest dealer or Takara Belmont directly.
□
If water is leaking from the drain hose, the drain
hose may be worn, degraded or damaged.
Immediately stop using the product and contact
the nearest dealer or Takara Belmont directly.
□
Use an item such as a toothbrush to remove any
dirt such as lime scale, and clean the shower head
plate. Leaving the shower head plate unclean will
lead to blockage, and water may not be output
from the shower head properly.
Inspectionitem
Inspection method
If the inspection results show defects
Inspectionitem
Inspection method
If the inspection results show defects
□
Can the basin be filled
with water?
□
Is the mohair tape not
deteriorated?
□
There is a strange
odor from shower
head holder.
□
Check that the drain cap can block
the drain when turning it over,
and water filling in the basin does
not drain.
□
Check that the mohair tape is not
peeled, deteriorated or it does not
become extremely dirty.
□
Check if there is a strange odor
from shower head holder.
□
When the water decreases quickly, there is a
possibility that the drain cap gasket has
deteriorated. The drain cap gasket is a
consumable part. Immediately replace it.
(Refer to page 26.)
□
Clean the mohair tape according to the supplied
“Mohair tape” Manual. If the dual function shower
head does not operate smoothly even after
cleaning the mohair tape, contact the nearest
dealer or Takara Belmont directly.
□
Replace the sponge, if the smell of sponge
becomes a concern from outside the shower
head holder. (Available at additional cost)
□
Is the drain not
blocked ?
□
Has the tap been
closed firmly ?
□
Check that the drain is not blocked
with the drain cap, towel or
shampoo cloth.
□
Turn the tap firmly in a clock wise
direction and check that the water
turns off properly .
