Neck Cushion
Metal Fittings
Snap Buttons
Fixing Pins
Basin side
Chair side
Snap Buttons
Snap Buttons
Head Pillow
（
Back side
）
Metal Fittings
Short side comes to basin side.
Long side comes to chair side.
■
Attach neck cushion
The fixing pins are detachable.
Be careful not to lose them.
■
Remove neck cushion
■
Attach head pillows
Preparation
Detach the snap buttons (4 locations) and remove the neck cushion.
1
As shown in the illustration, check the proper
direction of the neck cushion and fit it to the metal
fittings. (Pay attention to the proper direction.)
2
Secure the snap buttons of neck cushion on the chair side to the fixing
pins of metal fittings.
3
While shaping the neck cushion along the metal fittings, secure
the snap buttons of the neck cushion to the fixing pins on the basin
side.
Note
The neck cushion and head pillows are consumable supplies. Replace them if they are extremely dirty or the surface
has deteriorated. (available at additional cost)
To replace the neck cushion and head pillows, contact the nearest dealer or Takara Belmont directly.
Applying excessive force to remove the neck cushion may
break the parts.
As shown in the illustrations, check the proper direction of the head pillows and insert them into the metal fittings.
Caution
12
