background image

28

Check valve with filter

(water supply)

Check valve with filter

(hot water supply)

Loosen

Remove

Fasten

Flat head 

screwdriver, etc.

Filter

Cloth

Execute these processes for both water 

supply pipe and hot water supply pipe.

6

Remove the filters while holding a cloth under the 

check valves with filter, and remove water in the 

filters.

Removing the filter from the hot water supply pipe may 

cause hot water to spill out. Take extra care when 

draining the hot water. 

7

After cleaning the filters, return them to the original

position and fasten them properly.

Caution

Open the stop valve

Stop valve is

opened.

Checking for water leakage

11

Return the maintenance cover to its original position 

using the Urea screw (1 pce.)

removed at the process 1.

10  

Return the plumbing cover to its original position using 

the Urea screw removed at the process 2.

9

After checking that the filters have been fastened 

properly, open the stop valves.

8

Wipe any water that has spilled, and remove the cloth used.

Fasten the filters properly. Water may leak if the filters are 

loose.

If waste water spills on to the floor, wipe it dry immediately.

Open the maintenance cover once per week (measure):

 Check that water is not leaking onto the floor.

 Check that water is not leaking on the floor where installing SWING arm.

If there is water leakage, the basin unit or pipes in the rotation arm may be damaged, so contact the 
nearest dealer or Takara Belmont directly.

Caution

Summary of Contents for YUME SWING





































Reviews: