TAJIMA TLMX Series, User Manual

Page: 91 / 318

Decision of an embroidery design, Color Change Sequence
76
Chapter 4
RR05
4-3.
To change color automatically / to start operation automatically (Auto Color Change
"AC" / Auto Start "AS")
4-3-1.
Explanation on the screen
[a] Setting to perform color change automatically according to Auto Stitch Type Selection
YES: To perform
NO: Not to perform
Selecting NO will select the current needle bar or stitch type (LM head) irrespective of "Auto
Stitch Type Selection".
In case of TLMX mixed type and TLMX triple mixed type, when [a] is changed from NO to
YES in the middle of embroidery or when the head of "Auto Stitch Type Selection" is
different from the current head, the frame will move to the neighbor head after start of the
machine (fixed interval movement).
[b] Setting to start operation automatically after color change
YES: To perform
NO: Not to perform
Selecting "NO" will disable the following settings.
[c]
Setting to start operation automatically when the same needle bar No. is selected at the
previous and next steps.
YES: To perform
NO: Not to perform
1 Automatic Color Change (AC) / Automatic Start (AS)
B
AC YES/NO
AS YES/NO
YES/NO
Auto Start
NO
NO
NO
[a]
[b]
[c]
Auto color change
Auto start
Auto Start at Same Color
at Same Color
Frame travels to the right
Start
2
1
Not to start
Step
If the setting [c] is “NO”
To start
[*A]
3
R T /2
To start individually, insert ( → p.75)
*A
R T /2
R T /2