TAJIMA TLMX Series, User Manual

Page: 314 / 318

Terminology
299
Chapter 12
1
2
3
4
5
6
7
8
9
10
11
12
RR05
Frame Forward
To move the embroidery frame only in the
advancing direction of stitches with the needle
bar(s) stopped.
Frame Limit
Limit position that the frame can move (it is
indicated by mark-off line on the table).
Frame origin
An anchor point to calculate the current frame
position (X: 0.0, Y: 0.0).
Frame stepping
To move the embroidery frame only with the main
shaft of the machine is stopped during
embroidery.
Function code
Command code that controls general movements
of the machine. All design data consists of
function codes (Stitch, Jump, Color, etc.).
<H>
Head group
Function that assumes multiple heads as one
head by grouping them. This enables large design
embroidery or multi-colored embroidery of more
colors than the number of needles per head.
<I>
Inching
Movement to stabilize start of sewing by moving a
needle bar slowly before the main shaft starts
usual operation. It is executed before thread
trimming to stabilize thread trimming.
<J>
Jump
To make only the frame move in the state that
needle bar does not move down during operation.
It is possible to make a longer stitch than one
stitch of the maximum length.
<M>
Main shaft brake
To hold the main shaft with the brake of the main
shaft motor so that the main shaft does not rotate
when it stops.
M-axis
Drive shaft to rotate nipple or bobbin (TLMX
series).
<O>
Offset start position (Offset position)
A frame travel start position set by operation of
automatic offset. A position to make the machine
stand by to facilitate changing of frame and/or
fabric by moving the frame to the front
automatically in the middle or at the end of
embroidering.
<P>
Parameter
Setting item that decides the working condition of
the machine.
Pseudo-fixed position (stop at the lower dead point)
To stop the machine with the needle stuck in the
cloth at the end of embroidery. Moving the frame
in this condition will enable consecutive
embroidery.
<R>
Return Stitches
Tie stitch to be executed at start of sewing (stitch
to prevent mis-stitching at the start).
Running stitch
Decorative stitch of straight line or curved line
only.
<S>
Satin Stitch
Repeated zigzag stitches. It is mainly used for
hem of applique, logo, mark, flower design etc.
Sequin needle
Needle that embroiders sequins with sequin
device. It indicates the first needle or the last
needle.
Side Kick
Name of the network application software
manufactured by Pulse Microsystems Ltd. It is
possible to input the design data to the machine
by wireless LAN as the main function.