TAJIMA TLMX Series, User Manual

Page: 65 / 318

Message display
50
Chapter 3
RR05
2-1-2.
Storing or reading of condition data
Condition data can be stored or cannot be stored depending on its place to store.
: Storable/
: Not storable
2-2.
Start position of design
2-3. Offset Return
Condition data
Saving in the
machine memory
Saving to a USB
memory
Saving to machine mem-
ory from DG/ML by Pulse
T3, T2 T
1. Color Change
Sequence
2. Start position of design
[*1]
*1: When you embroider the design between the models with different embroidery spaces, the start
position of the design may differ depending on the model.
3. Data Conversion
[*2]
*2: Scaling up/down/rotation/reversion of design
4. Repeat of design
5. Automatic Offset
The message shown left will be displayed only when the machine
reads condition data at "2-1.".
This message is displayed when setting data of design. Design
start position means the frame position where this design was
started embroidering last time.
OK to move a frame to the
Start Point of Design Data ?
[X:+115.7 Y:-153.2]
"YES">>SET
"NO">>E
These figures mean the place to move of the frame.
Frame coordinates of it are shown.
OK to execute offset
return?
[X:+65.2 Y:-180.5]
"YES">>SET
"NO">>E
These figures mean the place to move of the frame.
Frame coordinates of it are shown.
The message shown left will be displayed only when the machine
has the setting of "Automatic offset".
This message is displayed when setting data of design. Offset
return means the offset start position where this design was
embroidered last time.