Press ESC to exit.
Product ID :
01 - WANpro 2000
02 - CS-Jr
03 - NMS9000
04 - Non-Channelize Router
05 - Channelize Router
06 - WANpro 2000i
Step 4:
Upload the firmware
Press 3 "Selected Target Upload" to target the device, this menu will list the device that has been
identify in your network on setup 2.
SW-Ver shows current version of the device.
Use Ethernet Address, Product ID and SW-Ver to filter the possibility if there is more then one
target shows on the list table.
Target the device by select the number on the list, "#" shows the target has been mark for which
you wish to upgrade, you can select the target again to remark the target. Press " F " to start
uploads the firmware.
Step 5:
Restart
When done, the devices will automatic restart.
58
