5.4.4 Manipulation Frame Relay via WAN or IDSL
Your WANpro 2000i allow only one serial port to act Frame Relay encapsulation, either WAN
port or IDSL port, but not both.
Configuration TAINET WANpro 2000i Version 3.00
================================================================================
System [Interface] Routing Table Security
Interface Configuration
+------------------------DLCI parameter-------------------------+
| |
| DLCI Local IP NetMask Remote IP |
| |
| 1 [110 ] 10.0.0.1 255.255.255.0 [168.0.2.17 ] |
| 2 0 10.0.0.1 255.255.255.0 0.0.0.0 |
| 3 0 10.0.0.1 255.255.255.0 0.0.0.0 |
| 4 0 10.0.0.1 255.255.255.0 0.0.0.0 |
| 5 0 10.0.0.1 255.255.255.0 0.0.0.0 |
| 6 0 10.0.0.1 255.255.255.0 0.0.0.0 |
| 7 0 10.0.0.1 255.255.255.0 0.0.0.0 |
| 8 0 10.0.0.1 255.255.255.0 0.0.0.0 |
| |
+---------------------------------------------------------------+
Press: '0' - '9', '.', SPACE, BS, DEL <Must locate inside the network>
TAB,ENTER:next field '<':left '>':right ESC:abort
DLCI parameter
table allows you to configure up to 8 remote IP nodes. The Local IP and
Netmask in DLCI table will automatically match to an encapsulate which you assign.
Information of DLCI parameter table should match to the Frame Relay switch.
36
