Routing Table
Default Gateway
In this field, enter the IP of the remote node that is the gateway for the
static route.
Device Control
Warm Start
Use this field to reload the parameter,
this is require when any value
in LAN Setup, WAN Setup and IDSL Setup has been modified.
Restore Default
This field
will restart the system and restore the factory
default parameters.
Monitor
LAN Rx Packets
The number of received packets from LAN port.
LAN Tx Packets
The number of transfer packets from LAN port.
LAN Rx Errors
The number of packets that received from the LAN port with specific
errors. (CRC error, frame error, missed packet, unknown or
unsupported protocol, etc.)
WAN Rx Packets
The number of received packets from WAN port.
WAN Tx Packets
The number of transferred packets from WAN port.
WAN Rx Errors
The number of packets that received from the WAN port with specific
errors. (CRC error, frame error, missed packet, unknown or
unsupported protocol, etc.)
IDSL Rx Packets
The number of received packets from IDSL port.
IDSL Tx Packets
The number of transferred packets from IDSL port.
IDSL Rx Errors
The number of packets that received from the IDSL port with specific
errors. (CRC error, frame error, missed packet, unknown or
unsupported protocol, etc.)
DHCP Server
This field identifies the DHCP Server function has enabled or disabled.
SNMP Agent
This field identifies SNMP Agent function has enabled or disabled
IP Filter
This field identifies IP Filter function has enabled or disabled.
NAT
This field identifies NAT function has enabled or disabled.
Diagnosis
Ping
In this field, enter the IP address you wish to ping, “
.
“ shows device
has success received the responds from destination IP, “
!
“ shows fail.
13
