WANpro 2000i
WANpro 2000i
PC
PC
PC
PC
PC
PC
Site A
10.0.0.1/30
Site B
10.0.0.2/30
Ethernet
Ethernet
CSU/DSU
or
Modem
CSU/DSU
or
Modem
The above diagram is the WAN PPP link, configuration of your WANpro 2000i could be like
follow.
Site A (10.0.0.1/30)
Site B (10.0.0.2/30)
Data mode Sync
Data mode Sync
Local IP
address
10.0.0.1 Local
IP
address
10.0.0.2
NetMask 255.255.255.252
NetMask 255.255.255.252
Encapsulate
<PPP>
Remote IP
address
0.0.0.0
Encapsulate
<PPP>
Remote IP
address
0.0.0.0
Configure the
Data mode
to
Sync
(Synchronous – External clock), the WANpro will follow the
data rate from the DCE device such as Modem or CSU/DSU.
The standard PPP encapsulate can be setup as above table or you can assign the IP to the remote
site.
Site A (Local)
Site B (Remote)
Local IP
address
10.0.0.1 Local
IP
address
0.0.0.0
NetMask 255.255.255.252
NetMask 0.0.0.0
Encapsulate
<PPP>
Remote IP
address
10.0.0.2
Encapsulate
<PPP>
Remote IP
address
0.0.0.0
NOTICE:
The IP shown this section are examples. You should substitute the IP values shown with values
that are appropriate for your network.
34
