Field Description
Destination
It specifies the IP network address of the final destination. If
"0.0.0.0" appears in the field, this entry specifies the "Default
Gateway" of route information.
NetMask
It represents the IP netmask of the destination IP address.
NextHop
It represents the IP address of the next router for transmission of
the IP datagram to the destination network segment.
Iface
Identify the IP routing to the corresponding interface
Type
First character (Status)
U: The route is valid (up) and in use.
D: The route is invalid (down) and has a metric of 16 (RIP infinity)
Second character (Source)
I: The route is a direct connection
R: the route was established from RIP information.
S: The route is a static route.
Mtr
The metric represents the cost of transmission for routing
purposes.
ARP Table:
Monitoring TAINET WANpro 2000i Version 3.00
================================================================================
System Interface Routing Table [ARP Table] DHCP Table Statistics
View ARP Table
Iface Encapsulate IP-Address Physical-Address Type Status
1 LAN Ethernet 172.16.5.41 0080C8469A5F Dynamic Active
2 LAN Ethernet 172.16.0.254 080020B0B86A Dynamic Active
SPACE:refresh page '<':page up '>':page down ESC:abort
The ARP table lists the LAN MAC addresses, which were learned by the WANpro. The WANpro
learns a device MAC address when IP traffic is generated between the router and other devices.
25
