4.2 Power on your WANpro
Before start, you should have connected the console port, the IDSL line, the Ethernet port and the
power port to the appropriate device or lines. You can now apply power to the WANpro by
turning the switch on.
Step 1.
Initial
Screen
When you power on your WANpro, it performs several seconds to internal tests, after it ready,
screen will shows “Press [ENTER KEY] return to menu.”, you can now press [ENTER] to the
login screen.
!!! Welcome to Access TAINET WANpro 2000i !!!
Please Enter Password :
ž`
Step 2.
Entering Password
The login screen appears prompting you to enter the password.
For the first login, enter the default password
root
. As you type the password, the screen displays
a ( * ) for each character you type.
Please note that if there is no activity for longer than 10 minutes after you login, your WANpro
will automatically log you out and will display a initial screen message “Press [ENTER KEY]
return to menu.”, press [ENTER] to bring up the login screen again.
After you enter the password, the TCS displays the Main Menu as shown below.
MAIN TAINET WANpro 2000i Version 3.00
================================================================================
[Configuration] Monitoring Device Control Diagnosis
System Interface Routing Table Security
ENTER:select TAB:next '<':left '>':right ESC:previous menu
17
