Tainet IPBX 230 User Manual Download

Page: 84 / 107

Chapter 5

Feature Configuration

5.6 Meet-me

Prompts

This page allows replacing built-in meet-me conference prompts with user

recordings.

Click a language and a prompt in the corresponding lists.

Find a corresponding recording in the local storage.

Click PUT FILE to complete the replacement.

To reset a prompt back to default, leave the Upload box in blank and directly

click the PUT FILE.

Note that the replacement is done for the selected Language and Prompt only.

Currently only following prompts could be replaced.

Figure 5-6 Meet-me Prompt Management

Table 5.6-1 Replaceable Meet-me Prompts

Prompt Description

Get PIN number

Please enter the conference pin number.

Invalid PIN

That pin is invalid for this conference.

Only Person

You are currently the only person in this conference.

Summary of Contents for IPBX 230












































































































Search results

Summary of Contents for IPBX 230

Reviews:

Related manuals for IPBX 230

Brands by name

Popular brands

Tainet IPBX 230, User Manual

Search results

Summary of Contents for IPBX 230

Reviews:

Related manuals for IPBX 230

Brands by name

Popular brands