Tainet IPBX 230, User Manual

Page: 75 / 107

Chapter 5 Feature Configuration
Chapter 5. Feature Configuration
A feature is a logical entity presenting a function module of IP PBX, e.g. meet-me conference,
auto attendant, voice mail, music on hold, etc. Any configuration change to a feature requires
clicking RELOAD in Service -> IP PBX Service to take effect.
5.1 Call Park
During a call, the callee may want to continue the conversation using another
phone. The call park feature enables so by letting the callee transfer the call to the
call park pilot number. IP PBX will respond an available park line from the pool of
call park numbers to the callee. After that the callee may hang up current phone,
move to another phone, and dial the park line number told by IP PBX to resume
conversation with the caller. If the callee does not call the given park line number
to retrieve his call before timeout, IP PBX will ring the original extension where the
callee answered the call. To configure Call Park feature, select Feature -> Call
Park.
Enter settings shown in Table 5.1-1.
Click APPLY .
Figure 5-1 Call Park Management
Table 5.1-1 Call Park Configuration Settings
Field Description
Call Park Pilot Number A unique extension number for call parking, e.g. 700.
Available Parking Lines An extension pool for call parking, e.g. 701-720 forms
a 20-line pool available for system to park calls.
Parking Timeout Timeout waiting for picking up the parked call
73