Tainet IPBX 230, User Manual

Page: 71 / 107

Chapter 4 IP PBX Configuration
69
Field Description
Outbound
Routegroup
9
Select a routegroup to associate routes with this trunk.
Outbound calls match included route patterns could
employ this trunk to access PSTN.
There may not be appropriate routegroup to select
initially. One can come back later to revise it, once the
expected routegroup is added.
DID of Extension When enabled DID, clicks an extension in the list to be an
unconditional destination for incoming calls to this trunk.
The PSTN numbers of the included ports are therefore
regarded as the direct line numbers of the extension.
If you set a DID extension in trunk, then only that
extension can use this trunk to call out, and all other
user’s call in this trunk will connect to that extension.
Language Preferred language for system instructions heard from the
trunk.
IVR List
10
Associate an IVR menu with incoming calls to this trunk.
This is mandatory unless the trunk is configured for DID.
Usergroup
11
of
Privilege
When disabled DID, click a usergroup in the list whose
reachability to other usergroups and trunks will be used as
the privilege of inbound calls from this trunk.
There may not be any appropriate usergroups to select
initially. One can come back later to revise it, once the
expected usergroups are added.
Advanced Settings Select to see more settings shown below.
Input/Output Gain Voice amplification or attenuation in dB scale to adjust
input/output volume of a PSTN line.
Minimum
Disconnection Tone
Minimum volume level of the disconnection tone. If a
PSTN trunk is found to have disconnection problem and
voice sounds low, choose a lower dB.
Delay Before/After
Answering
Delay in seconds before and after answering a call from
PSTN trunk.
9
Please refer to 0 for details.
10
Please refer to 5.12 for details.
11
Please refer to 4.2 for details.